Steam & Air Nozzle Tips

Category:
CD3 nozzle and C5 tip

Spraytech Systems supplies steam and air nozzle tips for use in a variety of applications where gas, air or steam spray is required.

Our steam and air nozzle tips can be used to provide a continuous air stream or for air recycling, as well as in any application where drying, cooling or blowing off is required. 

About Steam & Air Nozzle Tips

The CD3 is a one-piece air nozzle tip, while the C5 spray nozzle tip can be assembled with accessories. The CD3 air nozzle tip and C5 spray nozzle tip are both available in either brass or stainless steel (AISI 303 or AISI 316.

The CD3 air nozzle tips and C5 spray nozzle tip produce a flat jet spray using either an elliptic orifice or surface defection, resulting in a uniform spray distribution.

Steam & Air Nozzle Tips — Variations

At Spraytech Systems, our air nozzle tips include the CD3 flat spray nozzle tip and C5 spray nozzle tip.

Type CD3 Flat Spray Wide Nozzle

  • Thread sizes BSPT(M): ⅛″, ¼″, ⅜″, ½”, ¾”, 1”
  • Spray angle: 17˚ to 85˚
  • Air Capacity (litres per minute): 4.5 to 1140
  • Steam Capacity (kilograms per hour): 0.15 to 42.0
  • Pressure (bar): 0.7 to 3.5
  • Materials: brass, stainless steel (AISI 303 or AISI 316)

Spraytech CD3 air and steam spray nozzle tip table

Type C5 nozzle tip

  • Thread sizes BSPT(F): ¼″, ⅜″
  • Spray angle: 60˚ to 85˚
  • Air Capacity (litres per minute): 21 to 1724
  • Steam Capacity (kilograms per hour): 0.7 to 63.0
  • Air Pressure (bar): 0.7 to 6.0
  • Steam Pressure (bar): 1.0 to 7.0
  • Materials: Brass, stainless steel (AISI 303 or AISI 316)

Spraytech C5 air and steam spray nozzle tip table

Contact Spraytech Systems for Steam & Air Nozzle Tips

At Spraytech Systems, we are Australian specialists in the supply of steam and air nozzle tips, including the CD3 one-piece spray nozzle and C5 spray nozzle tip. Get in touch with us on (08) 9259 4350 for expert advice on finding the right air nozzle tip to meet your specific needs.